An extremely high quality floor finish. This product provides a durable, high gloss that levels well and exhibits excellent detergent and scuff resistance. It responds easily to conventional spray buffing as well as high speed burnishing. Formulated with metal cross linked polymers for added resilience, This product is a true work-horse in any maintenance program. Suitable for use on all types of resilient flooring, as well as varnished, painted, or sealed wood and masonry flooring.
 
Available in Gallons and 5 Gallon Pails

DIRECTIONS

INITIAL APPLICATION
1.Remove all old wax and floor finish with appropriate stripper.
2.Rinse the floor thoroughly (at least twice) with clean water.
3.Repeat steps 1-2 if all finish is not removed. Allow floor to dry.
4.Apply 3-4 thin coats of this product using a clean synthetic mop, allowing a minimum of 30 minutes between coats.
5.Apply additional coats in the same manner, allowing at least 30 minutes drying time between coats.
6.For very porous floors, an initial coat of floor sealer is recommended.

NOTE: Temperature, humidity and air movement affect curing time.
To avoid contamination, do not return any unused material to original container.

ROUTINE MAINTENANCE
1.Sweep or dust mop as necessary.
2.Damp mop with proper cleaner following label instructions. For accumulated soil, lightly scrub as needed.
3.After cleaning, spray buffing or burnishing may also be done once loose dirt and dust has been swept up.
4.Additional coats may be applied if needed.

FOR PROPER PERFORMANCE USE ONLY WHEN PRODUCT TEMPERATURE AND FLOOR TEMPERATURE ARE 50ºF OR HIGHER.

WARNING: Do not allow wet floor areas to be open to foot traffic. Wet shoes or wet spots can create a slippery condition. Wet floor areas should be cordoned off until dry for traffic.
Coverage: 2,000–2,500 square feet per gallon.